Atlanta homeowners comparing custom shower door companies often narrow the list to two established names. Drexler Glass, founded in 1953 by Cecil J. Drexler and now run by a third generation of the family, operates a frameless-specialist shop with a showroom on Northside Drive in Atlanta. MG Glass, founded in 1999 by Juan Marquez, is a founder-operated Atlanta shop serving seven north-metro Atlanta counties. Full transparency: this comparison is published by MG Glass, and every fact about Drexler Glass comes from Drexler's own website and public review platforms; where a data point is not published, this article says so instead of guessing. The sections below compare the two shops on pricing approach, installation quality and materials, warranty coverage, reviews, and best fit, so you can decide which company matches your project before requesting quotes.
Neither company publishes fixed pricing. Both shops quote each project individually, which is standard practice for custom glass work because enclosure size, glass selection, and hardware all change the final number. Drexler Glass states on its website that measurements typically happen within 24 hours of a request and quotes come back within one business day. MG Glass provides free on-site measurement and consultation across its seven-county Atlanta service area, and most homeowners receive a same-day phone quote.
MG Glass also publishes how a quote is built: a typical custom shower enclosure quote breaks down to roughly 40% glass, 35% hardware, and 25% labor. That breakdown helps homeowners compare quotes from any company line by line rather than reacting to a single bottom-line figure. The variables that move a quote up or down are the same at both shops: glass thickness (3/8 inch versus 1/2 inch), enclosure configuration, hardware finish, protective coatings, and low-iron glass upgrades. For a closer look at how those choices come together, see the custom frameless shower doors page. The practical takeaway is simple: get a measured, itemized quote from each company you are considering, then compare what each number includes rather than the number alone.
Both shops specialize in frameless work, and each brings a distinct production profile. Drexler Glass installed its first frameless shower door in 1984. The Northside Drive shop handles residential and commercial projects with a broad catalog that includes curved glass, grid-pattern enclosures, and barn door systems alongside standard frameless enclosures.
MG Glass builds enclosures exclusively with 3/8 inch and 1/2 inch tempered glass and never uses 1/4 inch glass for an enclosure. All glass meets the ANSI Z97.1 safety glazing standard, with ShowerGuard® protective coating and Starphire® low-iron glass available as upgrades. Hardware comes primarily from CRL, with US Horizon as a secondary line, and the shop runs its own in-house edging, polishing, and drilling equipment, so fabrication adjustments never wait on an outside vendor. Typical lead time runs 7-10 business days from deposit to install, and removal and disposal of an old enclosure are included at no charge. The gap between a shop-built enclosure and an off-the-shelf kit is covered in custom kits vs. professional precision engineering.
Staffing is worth asking about anywhere you request a quote. MG Glass installers are employees rather than subcontractors, and they are paid hourly rather than per job, which removes any incentive to rush an install. The team includes Spanish-speaking staff, and founder Juan Marquez still oversees every job. Recent MG Glass installations can be reviewed in the project gallery.
MG Glass publishes its warranty terms in full. The MG Glass Experience covers glass and hardware for life against manufacturing defects, adds a 1-year workmanship warranty, and answers warranty claims within 2-3 business days. Standard exclusions apply, including accidental damage, improper cleaning with caustic or abrasive products, and alterations to the original hardware. MG Glass also handles hardware warranty claims directly rather than routing homeowners to the manufacturer.
Drexler Glass does not publish its installation warranty terms on its website. Homeowners considering the Northside Drive shop can request current warranty details directly from Drexler before signing, and there is nothing unusual about doing so; many established contractors share warranty documents during the quoting stage rather than posting them online.
Whichever company you choose, get the warranty terms in writing before fabrication begins. A written warranty should state what is covered, for how long, what voids the coverage, and how quickly claims are answered. Published terms make that conversation faster, and a direct request gets you the same information anywhere it is not posted. Treat the written document, not a verbal assurance, as the deciding version.
Both companies carry strong reputations built over different timelines. Drexler Glass has operated in Atlanta since 1953; MG Glass has served the metro since 1999. Drexler's seven decades in the market are a genuine strength, and its reviews reflect it: the company holds a 4.7-star rating across 106 reviews on Birdeye, and customers on Angi (4.9) and Houzz (5.0) also rate the shop highly. Drexler's website additionally lists a "My Intown Best of 2026" award for shower enclosure work.
MG Glass does not publish a star rating, and this comparison will not invent one. What customers consistently cite in Google and Angi reviews is the pattern the company builds every job around: professionalism, cleanliness, and quality workmanship, delivered by a founder-operated team across 27+ years in the metro. Verified customer feedback is collected on the reviews page. Ratings are one input; reading a handful of recent, detailed reviews for each shop, on the same platform where possible, gives a more accurate picture than any single number.
Neither shop is the universal right answer; the better choice depends on the project and the homeowner. Before requesting quotes from any Atlanta glass company, work through this checklist:
On fit, the two companies serve different profiles well. Drexler Glass suits homeowners who want a Midtown-corridor showroom and a third-generation frameless specialist with decades of relationships among Atlanta designers and remodelers. MG Glass suits homeowners across the northern suburbs, from Dunwoody to Johns Creek, who want a founder-operated shop with published warranty terms, bilingual service, and free on-site measurement. Both are established Atlanta operations. MG Glass is 100% Licensed & Insured and carries $1M general liability, $1M auto, $2M umbrella, and $1M workers' comp coverage.
For a wider view of the market, see our guide to the top shower door companies in Atlanta.
Both are established Atlanta glass shops specializing in frameless shower enclosures. Drexler Glass is a third-generation family company founded in 1953, with a showroom on Northside Drive in Atlanta. MG Glass is a founder-operated shop established in 1999, serving seven north-metro counties with published lifetime glass-and-hardware warranty coverage against manufacturing defects.
MG Glass publishes its warranty terms: lifetime coverage on glass and hardware against manufacturing defects, plus a 1-year workmanship warranty, with claims answered in 2-3 business days. Drexler Glass does not publish installation warranty terms on its website; homeowners can request current details directly from Drexler before signing a contract. Because the two shops present warranty information differently, the fair comparison happens on paper: ask each company for its full written terms and confirm coverage length, exclusions, and claim response times before fabrication begins.
Both companies quote per project, and neither publishes fixed prices. A typical custom shower enclosure quote breaks down to roughly 40% glass, 35% hardware, and 25% labor, with glass thickness, configuration, hardware finish, and coatings driving the total. Request a free on-site measurement to get a project-specific number before comparing shops.
Ask six questions before signing: Can you show proof of insurance? Are warranty terms available in writing? What glass thickness do you install, and is it ANSI Z97.1 certified? Are installers employees or subcontractors? Do you serve my county? What is the lead time from deposit to install? MG Glass answers all six during a free consultation call, and more answers are collected in our residential glass FAQ.
Drexler Glass and MG Glass have both earned their reputations, and Atlanta homeowners are well served by either shop doing what it does best. If your project sits in the northern suburbs and you want a licensed and insured, founder-operated team backed by 27+ years serving the Greater Atlanta metro area, we would welcome the chance to quote it. Every install is built on professionalism, cleanliness, and quality workmanship, from the first measurement to the final walkthrough. Start with the shower designer to sketch your enclosure, explore the full lineup of residential glass services at mgglass.com, then request a free on-site measurement or call (470) 666-7180.
Experience the MG Glass difference today. Proudly providing Atlanta and all surrounding communities using only the best materials and expert installation. Contact us now to get started on your next project!